UniFi Building Bridge XG 2.2.0 includes the improvements and bugfixes listed below.

Improvements

• Added support for downloading support files via the side panel in the Network Application.
• Improved firmware update resiliency.
• Improved device stability.
• Improved LED behavior.
• Improved statistics reporting.
• Improved standalone pairing to select the peer with the strongest signal.
• Updated 60 GHz regulatory support for Brazil.

Bugfixes

• Fixed an issue where child device adoption could fail on DFS channels.
• Fixed uplink detection issues.

Known issues

• Firmware updates from version 1.2.0 or older may fail. Cache the firmware in the UniFi Network Application before updating. Learn more.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

• Added support for Building Bridge XG Single Units. Learn More
• Requires UniFi Network Application 10.0 or newer.
• iOS: 10.31.4 or newer.
• Android: 10.34.1 or newer.
• Added support for channel 165 in supported regions.
• Improved the factory reset process.
• Improved device adoption resiliency.
• Improved statistics reporting to the Network Application.
• Improved device stability.
• Prevent downgrades to releases older than 2.1.2.
• Updated regulations for the US and Australia.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG 1.2.3 includes the improvement listed below.

Improvements

• Improved device stability.

Known issues

• Firmware updates from version 1.2.0 or older may fail. Cache the firmware in the UniFi Network Application before updating. Learn more.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG 1.2.2 includes the improvements and bugfix listed below.

Improvements

• Added support for DHCP option 43.
• Improved SFP connection resiliency.
• Improved time/date syncing resiliency.
• Updated the regulations for Germany, the United Kingdom, Panama, the Philippines, Austria, Australia, Ukraine, and Italy.
• Changed the default credentials to ui/ui.

Bugfixes

• Fixed an issue where DNS Suffix configuration could fail.

Known issues

• Firmware updates from version 1.2.0 or older may fail. Cache the firmware in the UniFi Network Application before updating. Learn more.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG 1.2.0 includes the improvements listed below.

Improvements

• Added support for DFS channels on the backup radio (5GHz).
• Allow only outdoor channels for the backup radio (5GHz).
• Improved SFP module compatibility.
• Improved the firmware update process.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG 1.1.3 includes the improvements and bugfixes listed below.

Improvements

• Improved SFP module compatibility.
• Improved channel switching.

Bugfixes

• Fixed an issue where the 60GHz link would drop when the Internet source is at the station side.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG 1.1.2 includes the improvements listed below.

Improvements

• Improved reporting of Link Capacity/Quality/Speed.
• Devices will now pass traffic even in factory default state.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

• Added support for Japan.
• Disabled 5GHz DFS channels.
• Extended 5GHz outdoor channels.

Bugfixes

• Fixed statistics reporting.
• Fixed inconsistent LED behavior.

Additional information

All feedback is welcome, including lettings us know about successful device upgrades. Please ensure that you include the following information at a minimum:

• Network Application version.
• Firmware version (previous and current). 

UniFi Building Bridge XG Firmware 1.1.0 improves the device adoption and upgrading process.

Improvements

• Improved device adoption process.
• Improved firmware update stability.
• Improved SFP module/cable detection.
• Improved link capacity reporting.
• Improved Alignment tool algorithm.
• Increased available channels for the 5GHz radio. Requires an upcoming Network application update.
• Updated antenna gain for 5GHz/60GHz.
• Updated regulatory for counties: SI, AR, AT, AU, FR, KZ, NO, ZA. Requires an upcoming Network application update.

Bugfixes

• Fixed issue with reporting active radio.
• Fixed inconsistent LED behavior.

Additional information

If you encounter any issues with this release, please provide us some details on your setup and include the below information:

• Previous release version
• UniFi Network application version

This is the first official release.

Additional information

• Instead of using the manual links, you can also subscribe to your desired firmware channel, as described here.

Any and all feedback is welcome, including lettings us know about successful device upgrades. When reporting an issue, please ensure that you include the following information:

• UniFi Network Application version.
• Firmware version (previous and current). 
• Device model(s).